Li-Ion | PartQuest™ Explore

Copy of Li-Ion battery cell - on Mon, 04/20/2020 - 15:53

Aprille Hernandez
Designer221217

Member for

4 years 8 months

17

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This circuit models a Li-Ion (LiFePo4) battery

Based on the following paper:

Marek MICHALCZUK1, Bartłomiej UFNALSKI2, Lech M. GRZESIAK2, Piotr RUMNIAK2

Politechnika Warszawska, Instytut Automatyki i Robotyki (1), Instytut Sterowania i Elektroniki Przemysłowej (2)

Power converter-based electrochemical battery emulator

http://pe.org.pl/articles/2014/7/3.pdf

Status:

This model replicates figure 6 in the above paper, with the addition of modeling a variable number of cells.

The number of cells modeled can be changed by modifying the blocks:

NCELLS_const &amp; NCELLS_reciprocal_const

Modify the values of these blocks to the number of cells and reciprocal of the number of cells, respectively.

The model is calibrated for a single 40Ah battery cell (specifically, WB-LYP40AHA). This 40Ah calibration is represented by parameters values of 4 different blocks:

I_meas

Rsn_const

C1_const

R1_const

To calibrate for a given cell capacity, Capacity_cell [Ah], modify the parameters according to these relationships:

I_meas.K =

1/(Capacity_cell[Ah]*3600[s])

Rsn_const.OUTPUT_LEVEL =

3.1E-3[Ohm]*Capacity_cell[Ah]/40[Ah]

R1_const.OUTPUT_LEVEL =

1.9E-3[Ohm]*Capacity_cell[Ah]/40[Ah]

C1_const.OUTPUT_LEVEL =

22.75E3[Farad]*Capacity_cell[Ah]/40[Ah]

About text formats

Copy of Li-Ion battery cell - on Thu, 04/16/2020 - 15:11

Rolynd Troy Aquino
Designer221177

Member for

4 years 8 months

26

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This circuit models a Li-Ion (LiFePo4) battery

Based on the following paper:

Marek MICHALCZUK1, Bartłomiej UFNALSKI2, Lech M. GRZESIAK2, Piotr RUMNIAK2

Politechnika Warszawska, Instytut Automatyki i Robotyki (1), Instytut Sterowania i Elektroniki Przemysłowej (2)

Power converter-based electrochemical battery emulator

http://pe.org.pl/articles/2014/7/3.pdf

Status:

This model replicates figure 6 in the above paper, with the addition of modeling a variable number of cells.

The number of cells modeled can be changed by modifying the blocks:

NCELLS_const &amp; NCELLS_reciprocal_const

Modify the values of these blocks to the number of cells and reciprocal of the number of cells, respectively.

The model is calibrated for a single 40Ah battery cell (specifically, WB-LYP40AHA). This 40Ah calibration is represented by parameters values of 4 different blocks:

I_meas

Rsn_const

C1_const

R1_const

To calibrate for a given cell capacity, Capacity_cell [Ah], modify the parameters according to these relationships:

I_meas.K =

1/(Capacity_cell[Ah]*3600[s])

Rsn_const.OUTPUT_LEVEL =

3.1E-3[Ohm]*Capacity_cell[Ah]/40[Ah]

R1_const.OUTPUT_LEVEL =

1.9E-3[Ohm]*Capacity_cell[Ah]/40[Ah]

C1_const.OUTPUT_LEVEL =

22.75E3[Farad]*Capacity_cell[Ah]/40[Ah]

About text formats

Copy of Li-Ion battery cell - on Thu, 04/16/2020 - 15:10

Rolynd Troy Aquino
Designer221177

Member for

4 years 8 months

26

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This circuit models a Li-Ion (LiFePo4) battery

Based on the following paper:

Marek MICHALCZUK1, Bartłomiej UFNALSKI2, Lech M. GRZESIAK2, Piotr RUMNIAK2

Politechnika Warszawska, Instytut Automatyki i Robotyki (1), Instytut Sterowania i Elektroniki Przemysłowej (2)

Power converter-based electrochemical battery emulator

http://pe.org.pl/articles/2014/7/3.pdf

Status:

This model replicates figure 6 in the above paper, with the addition of modeling a variable number of cells.

The number of cells modeled can be changed by modifying the blocks:

NCELLS_const &amp; NCELLS_reciprocal_const

Modify the values of these blocks to the number of cells and reciprocal of the number of cells, respectively.

The model is calibrated for a single 40Ah battery cell (specifically, WB-LYP40AHA). This 40Ah calibration is represented by parameters values of 4 different blocks:

I_meas

Rsn_const

C1_const

R1_const

To calibrate for a given cell capacity, Capacity_cell [Ah], modify the parameters according to these relationships:

I_meas.K =

1/(Capacity_cell[Ah]*3600[s])

Rsn_const.OUTPUT_LEVEL =

3.1E-3[Ohm]*Capacity_cell[Ah]/40[Ah]

R1_const.OUTPUT_LEVEL =

1.9E-3[Ohm]*Capacity_cell[Ah]/40[Ah]

C1_const.OUTPUT_LEVEL =

22.75E3[Farad]*Capacity_cell[Ah]/40[Ah]

About text formats

Copy of LiFePo4 battery cell - on Wed, 04/15/2020 - 18:17

Irving
Designer44896

Member for

7 years 11 months

30

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This circuit models a Li-Ion (LiFePo4) battery

Based on the following paper:

Marek MICHALCZUK1, Bartłomiej UFNALSKI2, Lech M. GRZESIAK2, Piotr RUMNIAK2

Politechnika Warszawska, Instytut Automatyki i Robotyki (1), Instytut Sterowania i Elektroniki Przemysłowej (2)

Power converter-based electrochemical battery emulator

http://pe.org.pl/articles/2014/7/3.pdf

Status:

This model replicates figure 6 in the above paper, with the addition of modeling a variable number of cells.

The number of cells modeled can be changed by modifying the blocks:

NCELLS_const &amp; NCELLS_reciprocal_const

Modify the values of these blocks to the number of cells and reciprocal of the number of cells, respectively.

The model is calibrated for a single 40Ah battery cell (specifically, WB-LYP40AHA). This 40Ah calibration is represented by parameters values of 4 different blocks:

I_meas

Rsn_const

C1_const

R1_const

To calibrate for a given cell capacity, Capacity_cell [Ah], modify the parameters according to these relationships:

I_meas.K =

1/(Capacity_cell[Ah]*3600[s])

Rsn_const.OUTPUT_LEVEL =

3.1E-3[Ohm]*Capacity_cell[Ah]/40[Ah]

R1_const.OUTPUT_LEVEL =

1.9E-3[Ohm]*Capacity_cell[Ah]/40[Ah]

C1_const.OUTPUT_LEVEL =

22.75E3[Farad]*Capacity_cell[Ah]/40[Ah]

About text formats

Li-Ion battery cell

Mason Adams
Designer209116

Member for

5 years 3 months

33

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This circuit models a Li-Ion (LiFePo4) batteryBased on the following paper:Marek MICHALCZUK1, Bartłomiej UFNALSKI2, Lech M. GRZESIAK2, Piotr RUMNIAK2Politechnika Warszawska, Instytut Automatyki i Robotyki (1), Instytut Sterowania i Elektroniki Przemysłowej (2)Power converter-based electrochemical battery emulatorhttp://pe.org.pl/articles/2014/7/3.pdfStatus:This model replicates figure 6 in the above paper, with the addition of modeling a variable number of cells. The number of cells modeled can be changed by modifying the blocks:NCELLS_const &amp; NCELLS_reciprocal_constModify the values of these blocks to the number of cells and reciprocal of the number of cells, respectively.The model is calibrated for a single 40Ah battery cell (specifically, WB-LYP40AHA). This 40Ah calibration is represented by parameters values of 4 different blocks: I_meas Rsn_const C1_const R1_const To calibrate for a given cell capacity, Capacity_cell [Ah], modify the parameters according to these relationships: I_meas.K = 1/(Capacity_cell[Ah]*3600[s]) Rsn_const.OUTPUT_LEVEL = 3.1E-3[Ohm]*Capacity_cell[Ah]/40[Ah] R1_const.OUTPUT_LEVEL = 1.9E-3[Ohm]*Capacity_cell[Ah]/40[Ah] C1_const.OUTPUT_LEVEL = 22.75E3[Farad]*Capacity_cell[Ah]/40[Ah]

About text formats

Li-Ion battery cell impedance test (current source)

MasonAdams_1
Designer214515

MasonAdams_1

Member for

5 years

5

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This circuit models a Li-Ion batteryBased on the following paper:Marek MICHALCZUK1, Bartłomiej UFNALSKI2, Lech M. GRZESIAK2, Piotr RUMNIAK2Politechnika Warszawska, Instytut Automatyki i Robotyki (1), Instytut Sterowania i Elektroniki Przemysłowej (2)Power converter-based electrochemical battery emulatorhttp://pe.org.pl/articles/2014/7/3.pdfStatus:This model replicates figure 6 in the above paper. The model is calibrated for a single 40Ah battery cell. This 40Ah calibration is represented by parameters values of 4 different blocks: I_meas Rsn_const C1n_const R1n_const To calibrate for a given cell capacity, Capacity_cell [Ah], modify the parameters according to these relationships: I_meas.K = 1/(Capacity_cell[Ah]*3600[s]) Rsn_const.OUTPUT_LEVEL = 3.1E-3[Ohm]*Capacity_cell[Ah]/40[Ah] R1n_const.OUTPUT_LEVEL = 1.9E-3[Ohm]*Capacity_cell[Ah]/40[Ah] C1n_const.OUTPUT_LEVEL = 22.75E3[Farad]*Capacity_cell[Ah]/40[Ah]

About text formats

Li-Ion battery cell

Tomas_1
Designer207728

Tomas_1

Member for

5 years 4 months

6

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This circuit models a Li-Ion (LiFePo4) batteryBased on the following paper:Marek MICHALCZUK1, Bartłomiej UFNALSKI2, Lech M. GRZESIAK2, Piotr RUMNIAK2Politechnika Warszawska, Instytut Automatyki i Robotyki (1), Instytut Sterowania i Elektroniki Przemysłowej (2)Power converter-based electrochemical battery emulatorhttp://pe.org.pl/articles/2014/7/3.pdfStatus:This model replicates figure 6 in the above paper, with the addition of modeling a variable number of cells. The number of cells modeled can be changed by modifying the blocks:NCELLS_const &amp; NCELLS_reciprocal_constModify the values of these blocks to the number of cells and reciprocal of the number of cells, respectively.The model is calibrated for a single 40Ah battery cell (specifically, WB-LYP40AHA). This 40Ah calibration is represented by parameters values of 4 different blocks: I_meas Rsn_const C1_const R1_const To calibrate for a given cell capacity, Capacity_cell [Ah], modify the parameters according to these relationships: I_meas.K = 1/(Capacity_cell[Ah]*3600[s]) Rsn_const.OUTPUT_LEVEL = 3.1E-3[Ohm]*Capacity_cell[Ah]/40[Ah] R1_const.OUTPUT_LEVEL = 1.9E-3[Ohm]*Capacity_cell[Ah]/40[Ah] C1_const.OUTPUT_LEVEL = 22.75E3[Farad]*Capacity_cell[Ah]/40[Ah]

About text formats

Li-Ion battery cell impedance test

Tomas_1
Designer207728

Tomas_1

Member for

5 years 4 months

6

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This circuit models a Li-Ion batteryBased on the following paper:Marek MICHALCZUK1, Bartłomiej UFNALSKI2, Lech M. GRZESIAK2, Piotr RUMNIAK2Politechnika Warszawska, Instytut Automatyki i Robotyki (1), Instytut Sterowania i Elektroniki Przemysłowej (2)Power converter-based electrochemical battery emulatorhttp://pe.org.pl/articles/2014/7/3.pdfStatus:This model replicates figure 6 in the above paper. The model is calibrated for a single 40Ah battery cell. This 40Ah calibration is represented by parameters values of 4 different blocks: I_meas Rsn_const C1n_const R1n_const To calibrate for a given cell capacity, Capacity_cell [Ah], modify the parameters according to these relationships: I_meas.K = 1/(Capacity_cell[Ah]*3600[s]) Rsn_const.OUTPUT_LEVEL = 3.1E-3[Ohm]*Capacity_cell[Ah]/40[Ah] R1n_const.OUTPUT_LEVEL = 1.9E-3[Ohm]*Capacity_cell[Ah]/40[Ah] C1n_const.OUTPUT_LEVEL = 22.75E3[Farad]*Capacity_cell[Ah]/40[Ah]

About text formats

Li-Ion battery cell

Ben LeVine
Designer100316

Ben LeVine

Member for

7 years 3 months

19

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This circuit models a Li-Ion (LiFePo4) batteryBased on the following paper:Marek MICHALCZUK1, Bartłomiej UFNALSKI2, Lech M. GRZESIAK2, Piotr RUMNIAK2Politechnika Warszawska, Instytut Automatyki i Robotyki (1), Instytut Sterowania i Elektroniki Przemysłowej (2)Power converter-based electrochemical battery emulatorhttp://pe.org.pl/articles/2014/7/3.pdfStatus:This model replicates figure 6 in the above paper, with the addition of modeling a variable number of cells. The number of cells modeled can be changed by modifying the blocks:NCELLS_const &amp; NCELLS_reciprocal_constModify the values of these blocks to the number of cells and reciprocal of the number of cells, respectively.The model is calibrated for a single 40Ah battery cell (specifically, WB-LYP40AHA). This 40Ah calibration is represented by parameters values of 4 different blocks: I_meas Rsn_const C1_const R1_const To calibrate for a given cell capacity, Capacity_cell [Ah], modify the parameters according to these relationships: I_meas.K = 1/(Capacity_cell[Ah]*3600[s]) Rsn_const.OUTPUT_LEVEL = 3.1E-3[Ohm]*Capacity_cell[Ah]/40[Ah] R1_const.OUTPUT_LEVEL = 1.9E-3[Ohm]*Capacity_cell[Ah]/40[Ah] C1_const.OUTPUT_LEVEL = 22.75E3[Farad]*Capacity_cell[Ah]/40[Ah]

About text formats

Li-Ion battery cell (3 RC TDFS)

tangkongyuen
Designer198375

tangkongyuen

Member for

5 years 11 months

15

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This circuit models a Li-Ion (LiFePo4) batteryBased on the following paper:Marek MICHALCZUK1, Bartłomiej UFNALSKI2, Lech M. GRZESIAK2, Piotr RUMNIAK2Politechnika Warszawska, Instytut Automatyki i Robotyki (1), Instytut Sterowania i Elektroniki Przemysłowej (2)Power converter-based electrochemical battery emulatorhttp://pe.org.pl/articles/2014/7/3.pdfStatus:This model replicates figure 6 in the above paper, with the addition of modeling a variable number of cells. The number of cells modeled can be changed by modifying the blocks:NCELLS_const &amp; NCELLS_reciprocal_constModify the values of these blocks to the number of cells and reciprocal of the number of cells, respectively.The model is calibrated for a single 40Ah battery cell (specifically, WB-LYP40AHA). This 40Ah calibration is represented by parameters values of 4 different blocks: I_meas Rsn_const C1_const R1_const To calibrate for a given cell capacity, Capacity_cell [Ah], modify the parameters according to these relationships: I_meas.K = 1/(Capacity_cell[Ah]*3600[s]) Rsn_const.OUTPUT_LEVEL = 3.1E-3[Ohm]*Capacity_cell[Ah]/40[Ah] R1_const.OUTPUT_LEVEL = 1.9E-3[Ohm]*Capacity_cell[Ah]/40[Ah] C1_const.OUTPUT_LEVEL = 22.75E3[Farad]*Capacity_cell[Ah]/40[Ah]

About text formats

Terms of Use Cookie Notice Data Privacy Notice

Aprille HernandezDesigner221217

Member for

Rolynd Troy AquinoDesigner221177

Member for

Rolynd Troy AquinoDesigner221177

Member for

IrvingDesigner44896

Member for

Mason AdamsDesigner209116

Member for

MasonAdams_1Designer214515

Member for

Tomas_1Designer207728

Member for

Tomas_1Designer207728

Member for

Ben LeVineDesigner100316

Member for

tangkongyuenDesigner198375

Member for

Aprille Hernandez
Designer221217

Rolynd Troy Aquino
Designer221177

Rolynd Troy Aquino
Designer221177

Irving
Designer44896

Mason Adams
Designer209116

MasonAdams_1
Designer214515

Tomas_1
Designer207728

Tomas_1
Designer207728

Ben LeVine
Designer100316

tangkongyuen
Designer198375